15-5 is used widely in 3D-printing thin-walled devices, complex parts, cold and hot spraying, laser coating, and biomedical applications.

About the 3D Printing 15-5 Stainless Steel Powder: Stainless 15-5 metal powder can be used for 3D printing of thin-walled parts and devices, cold and hot spraying, laser cladding and biomedical applications. Stainless Steel PH 15-5 is a martensitic, precipitated stainless steel that has excellent corrosion resistance and mechanical properties.
This stainless steel is pre-alloyed and fine powder. This steel has excellent corrosion resistance, and good mechanical properties. This type is used widely in medical, aerospace, engineering and other applications requiring high hardness, strength, and corrosion resistance.
In metal injection molding, precipitation hardening is the most commonly used alloy. Cu tends to evaporate when sintering, which is one of its potential disadvantages. It may be necessary to clean the oven regularly in order to prevent cross-contamination. The current study of 15-5pH has been initiated in part with this aspect in mind.
It is a martensitic, precipitate-hardened stainless alloy containing 15 chromium. It has a high degree of strength, hardness, and corrosion resistance. Heat treatment at low temperatures can increase the strength. It is stronger and more malleable than 17-4 pH. It welds well. This powder can be used in any thermal condition. If you are interested in purchasing 3D Printing Powder Stainless Steel Powder, 15-5, in bulk quantities, please send us an inquiry.

Category for Stainless Steel Powder:
Alloy grades & Characteristics
Alloy number Stainless Steel powder
Stainless steel:304,316L,410L,15-5PH,17-4PH,2Cr13;
High-strength steel:A100,300M,30CrMnSiA,40CrMnSiMoVA;
Work die steel:18Ni300,H13,M2,M35,M42,T15,2030,S390
Iron Nickel Alloy Powder: Invar 36
The particle size of Stainless Steel Powder:
0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm

Morphology and morphology of Stainless Steel Powder
Spherical or near spherical

The appearance and properties of Stainless Steel powder
Grey

Package of Stainless Steel Powder:
Aluminum bag, Vacuum packing

Application of Stainless Steel:
3D printing powder

Other applications of Stainless Steel:
powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.


The 15-5PH stainless is an upgrade of the 17-4PH that was developed in the 1960s. This finer structure was achieved by the remelting procedure. This delicate structure increases the toughness. The material has excellent corrosion resistance and is suitable for many different industries. It can be processed either in the solution annealing stage or final heat-treatment state. Heat treatment at different temperatures improves the strength and ductility.
Any conditions are acceptable for processing 15-5PH. First, the alloy is slightly formed under the conditions of averaging. It is then weld using techniques such as protection fusion or resistance method. The material was heated at 1038degC (1900degF), then cooled with air for half an hour. It is then followed by annealing the alloy at 1038degC for 1 hour and cold working.

Applications 3D Printer Powder 15-5 Stainless Steel powder
15-5PH stainless may be used for heating or resolving treatment conditions in order to obtain various properties. The stainless steel can be treated in many different ways, but the H1150m treatment conditions provide the longest life.
Applications: aerospace parts, components manufacturing, other equipment.
Other uses for stainless steel 15-5:
The marine gas compressor section
Hollow shaft,
Papermill equipment
Engine parts
Aircraft parts
gear
Fittings & fasteners
Nuclear reactor assembly
Aerospace structural components
The valve
The gear and shaft
Components for oil and gas
Nuclear reactor assembly

Storage Condition for 15-5 Stainless Steel powder:
As damp reunion can affect the performance of 15-5 powder and its use, it is important to store 15-5 stainless powder in a dry and cool room. Ti2AlC Powder should not be exposed to stress.

Shipping & Packing of 15-5 Stainless Steel Powder
The amount of powder 15-5 stainless is used to determine the type of packing.
15-5 stainless powder packaging: Vacuum packed, 100g/bag, 500g/bag or 1kg/bag. 25kg/barrel or as per your request.
15-5 Stainless Steel Powder Shipping: Can be shipped by air or sea as soon after payment as possible.

Properties 15-5 Stainless Steel Powder
Alternative Names	15-5 stainless Steel Powder, 15-5 Stainless Steel
CAS Number	N/A
Compound Formula	N/A
Molecular Mass	N/A
Appearance	Grey
Melting Point	N/A
Solubility	N/A
Density	N/A
Purity	N/A
Particle Size	0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm
Bolding Point	N/A
Specific Heating	N/A
Thermal Conduction	N/A
Thermal Expander	N/A
Young Modulus	N/A
Exact Mass	N/A
Monoisotopic Mash	N/A
Health & Safety Information on 15-5 Stainless Steel Powder
Safety Advisory	N/A
Hazard Statements	N/A
Flashing point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Declarations	N/A
RTECS Number	N/A
Transport Information	N/A
WGK Germany	N/A

Inquiry us