Trending

News

  • 0
  • 0

Explore fast neutron shielding materials: B4C Boron Carbide Polyethylene Sheet boron carbide firearms

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Standard features of B4C

Boron carbide (B4C) is a not natural compound with a solid structure, primarily made up of boron and carbon elements. Its exceptional buildings in numerous applications make it a vital useful product. The density of B4C has to do with 2.52 g/cm ³, which is lighter than various other usual shielding materials. Additionally, the melting point of B4C is as high as 2450 ° C, enabling it to keep excellent framework and performance in high temperature atmospheres.

B4C has an exceptionally high neutron absorption cross-section, and its protecting result on fast neutrons is particularly significant. Neutrons are normally not bound by typical materials such as lead or light weight aluminum, and B4C can successfully take in neutrons and convert them into gamma rays, thus lowering the unsafe effects of radiation. Consequently, B4C ends up being a suitable selection for producing neutron shielding products.

(TRUNNANO Boron Carbide Powder)

The role of polyethylene

Polyethylene (PE) is a common polycarbonate that is extensively used in various areas as a result of its excellent optical, chemical and electrical insulation homes. In nuclear radiation protection, integrating B4C with polyethylene can not only improve the toughness and wear resistance of the product, however also lower the general weight of the product, making it simpler to install and apply.

When polyethylene shields neutrons, it reduces them down by hitting them. Although the neutron absorption capacity of polyethylene is far much less than that of B4C, its slowdown and buffering homes can be totally made use of in the design of composite products to enhance the total shielding impact.

Preparation procedure of B4C polyethylene board

The procedure of producing B4C polyethylene composite panels entails several actions. First, high-purity B4C powder have to be prepared via high-temperature solid-phase synthesis. Then, the B4C powder is combined with polyethylene resin in a particular percentage. During the blending procedure, B4C fragments are evenly dispersed in the polyethylene matrix by utilizing mechanical mixing and warm pressing.

After molding, annealing is performed. This procedure helps launch internal anxiety and boost the overall performance of the product. Lastly, the completed B4C polyethylene panels are reduced right into the called for specifications to help with subsequent building and construction and usage.

(TRUNNANO Boron Carbide Powder)

Vendor of Boron Carbide Powder

TRUNNANO is a supplier of 3D Printing Materials with over 12 years experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you want to know more about boron carbide firearms, please feel free to contact us and send an inquiry.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…