Trending

News

  • 0
  • 0

Where are concrete admixtures used?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for concrete additive.

At first, concrete additives were used only to save cement. With the development of construction technology, admixture has become the main measure to improve the performance of concrete.

 

What are advantages of concrete additives?

It can reduce the water consumption of concrete. Or the fluidity of concrete can be increased without increasing water consumption.

 

The setting time of concrete can be adjusted.

 

Reduce bleeding and segregation. Improve workability and water elutriation resistance.

 

The slump loss can be reduced. Increase the pumpability of pumping concrete.

 

It can reduce contraction. The addition of expansive agent can also compensate for shrinkage.

 

Delay the initial hydration heat of concrete. Reduce the temperature rise rate of mass concrete and reduce the occurrence of cracks.

 

Improve the early strength of concrete. Prevent freezing at negative temperature.

 

Improve strength, increase frost resistance, impermeability, wear resistance, corrosion resistance.

 

Control alkali-aggregate reaction. Prevent the corrosion of steel bar and reduce the diffusion of chloride ion.

 

Made into concrete with other special properties.

 

Reduce the viscosity coefficient of concrete.

 

Where are concrete admixtures used?

1. It is suitable for mass concrete, high-strength and high-performance concrete, roller compacted concrete, concrete constructed in hot weather, concrete poured in a large area, concrete produced by cold joints, concrete that needs to be parked or transported for a long time, self-leveling vibration-free concrete, slip form construction or horizontal construction and other concrete that needs to delay setting time.

 

2. It is suitable for different grades of concrete under the daily minimum temperature of 5 degrees Celsius, as well as various continuous pouring projects of high flow concrete, commercial concrete, pumping concrete, prestress and reinforced concrete.

 

3. It is not suitable to be used alone for concrete with early strength requirements and steam curing concrete.

 

Concrete Additives Supplier

TRUNNANO is a reliable concrete additives manufacturer with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Ukrainian media recently reported that Ukraine will build a food transfer station in the Chernovze region, and the first phase is scheduled to be completed by the end of 2022. According to reports, the completion of the project will help ease the current congestion in grain shipments, and it is estimated that the transfer station will be able to handle 3 million tons of grain per year and store up to 200000 tons of grain at the same time.


According to the Cuban Electric Union on August 8, affected by the fire at the oil reserve base in Matansas province, the Antonio Guiteras thermal power plant near the oil storage base stopped operation at about 13:00 local time. It is reported that the shutdown of the thermal power plant is due to water shortage, and although measures have been taken to supply water to the plant through pipelines, it is still not enough to maintain its operation. The Cuban electricity Union said it could not guarantee that the thermal power plant would resume operation during peak hours.


According to a monthly monitoring report released by the Copernicus Climate change Service, an EU climate monitoring agency in Bologna, Italy, in July 2022, the Antarctic sea ice area was the lowest in 44 years of satellite monitoring records, 7% lower than the average.


Luoyang Tongrun Nano Technology is a trusted chemical manufacturer and supplier providing high-quality chemicals and Nanomaterials. If you are looking for the concrete additive, please feel free to contact us and send an inquiry.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…