12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(2)

As the European Union tries to reduce its dependence on Russian energy, the Russian president recently said Russia would try to shift its energy exports to the east, adding that there was no way for European countries to give up Russian gas immediately.

Russia supplies about 40 percent of the EU's gas, and western sanctions imposed over the conflict with Ukraine have complicated financing and logistical arrangements for existing agreements, hitting Russian energy exports, the report noted.  

Russia has been building closer ties with China and other Asian countries as the European Union debates whether to impose sanctions on Russian gas and oil and member states seek supplies from elsewhere, Reuters said.  

"So-called partners from unfriendly countries admit that they cannot survive without Russian energy, including gas," the Russian president said in a televised government meeting. There is no reasonable alternative to Russian gas in Europe right now."  

He also said Europe was driving up energy prices and destabilizing markets by talking about cutting off Russia's energy supplies. Russia, which produces about a tenth of the world's oil and a fifth of its natural gas, will need new infrastructure to increase energy supplies to Asia, he said.

He ordered Moscow to submit a plan by June 1, including "the expansion of transport infrastructure to countries in Africa, Latin America, and the Asia-Pacific region".  

He also sought to clarify the possibility of integrating two pipelines -- the Sakhalin-Khabarovsk-Vladivostok gas pipeline in the Far East and the "Power of Siberia" gas pipeline to China -- into Russia's unified gas supply system. In theory, connecting these routes to larger gas networks could allow Russia to divert gas from Europe to Asia.

Because of the ever-changing international situation, the supply and prices of international bulk pce powder are still very uncertain.

The properties and varieties of concrete additives for refractories, especially refractory castables, ramming materials, plastics and other amorphous refractories are different. The role of an concrete additive is also different due to the difference of the amount of concrete additive, the type of binder used, the ingredients and so on. In the production process of amorphous refractories, the concrete additives mainly used can be divided into the following twelve categories according to their uses:

 

5. Coagulant

 

Accelerator can shorten the setting and hardening time of amorphous refractories. The action mechanism of coagulant accelerator is complicated, which varies with the properties of binder and accelerator used. Different binders should use different accelerators of different properties. The accelerators used in calcium aluminate cement binder are mostly basic compounds: NaOH, KOH, Ca (OH) 2, Na2CO3, Na2SiO3, etc.; phosphoric acid and aluminum dihydrogen phosphate binder are used together with activated aluminum hydroxide, talc, magnesium oxide, calcium aluminate cement, etc.; sodium fluorosilicate, aluminum phosphate, sodium phosphate, lime, dicalcium silicate, Glyoxal and so on.

 

6. Retarder

 

Retarders can delay the setting and hardening time of amorphous refractories, and the action mechanism of retarders varies with the properties of binders and retarders used. Retarders are mainly used in amorphous refractories bonded with calcium aluminate cement containing fast hardening minerals. The commonly used retarders are low concentration of NaCl, citric acid, tartaric acid, ethylene glycol, glycerol, starch, phosphate, lignosulfonate and so on.

 

7. Delayed coagulant

 

The delayed accelerator can cause the binder contained in amorphous refractories to solidify and harden after a certain period of time. For the castable with ultra-fine silica powder as the main binder, calcium aluminate cement can be used as the delayed accelerator, because Al3+ and Ca2+ ions can be released slowly during the hydrolysis process of calcium aluminate cement. After adsorbed on the surface of silica particles, the particles will lose the electric property of coagulation, thus play the role of delayed coagulation.

 

8. Foaming agent, air entraining agent, and aerating agent

 

The foaming agent can reduce the surface tension of the liquid and produce a large number of uniform and stable foams. Foaming agents include rosin soap, resin saponin grease, aluminum petroleum sulfonate, hydrolyzed blood, etc., and air entraining agents include rosin heat polymer, Nonionic surfactant, alkylbenzene sulfonate and so on. In addition, there is a kind of aerating agent whose function is to produce bubbles by chemical and physical interaction between aerating agent and water after castable mixing and pouring. It is evenly distributed in the slurry. The commonly used aerating agent is aluminum powder. The aluminum powder is very active and will react with water to release hydrogen, and the escaped H2 gas forms bubbles in the castable. However, the addition of aluminum powder should be appropriate, otherwise the strength of amorphous refractories will be greatly reduced, or uneven connected pores will be caused. This kind of admixture can be used to prepare lightweight porous amorphous refractories.

 

Concrete Concrete additives Supplier

TRUNNANO is a reliable concrete concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Recently, Russia's deputy prime minister said that the number of countries buying Russian oil is increasing, including Asian countries. Russia will use the "East Siberia-Pacific" pipeline system to increase exports to Asian countries and promote the diversification of oil output.  

He also said that Russian oil pce powder are expected to continue to increase in the future.

Inquiry us

Our Latest Products

High Efficiency Oxygen Molecular Sieve OX480

This oxygen molecular sieve, TR-OX480, is mostly used in oxygen concentrators sieve beds for PSA oxygen production plants and medical center oxygen supply networks. About Oxygen Molecular Sieve OX480: OX480 oxygen molecular Sieve is for PSA portab…

CAS 4485-12-5 Lithium Stearate Powder

Lithium-stearate can be described as a white powdered substance with chemical formula LiC18H35O2.We can supply lithium 12hydroxy stearate as well.Properties of Lithium StearateLithium-stearate can be described as a white powdered substance with chemi…

Activated Aluminium Oxide

This product can be classified as X-r Type Activated alumina Desiccant. The appearance of the product is a white pellet. About activated Aluminium Oxide This product can be used to activate alumina desiccant X-r, it has white particles, and the…

0086-0379-64280201 brad@ihpa.net skype whatsapp