News

  • 0
  • 0

Scientists Use 3D Printing to Print Non-magnetic Metal Powders into Magnetic Alloys

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for 3D printing metal powder.

Scientists at Skoltech University in Russia used a 3D printer to create an alloy of two materials whose composition ratios varied from one region of the sample to the next, and the resulting alloy had gradient magnetism, even though none of the initial materials were magnetic.
 
3D printing, a rapid prototyping method, is maturing for aircraft parts, medical implants and prosthetics, jewelry, custom shoes, and more. 
 
The main advantage of 3D printing is the ability to create objects with very complex shapes that are either too expensive to produce or completely impossible to produce using traditional casting, rolling, stamping, or machining methods. 3D printing speeds up prototyping time and offers greater flexibility in product personalization and the number of batches. Another significant advantage of 3D printing is its low waste. 
 
However, 3D printing has its limitations, requiring objects to be made entirely of homogeneous materials or mixtures. If the composition is different in different parts of the product, it is possible to obtain samples with changing characteristics. For example, A bar made of an alloy of two metals has A variable ratio of composition: one end starts with 100 percent of metal A, then 50 percent of each, then 100 percent of metal B, and so on. Thus, the properties of the obtained materials (including magnetic materials) can vary in a gradient, which makes them potentially useful for the manufacture of motor rotors, magnetic encoder strips, transformers, etc.
 
Skoltech scientists have researched and made such a kind of material, with the original ingredients A and B being two alloys: aluminum-bronze (copper, aluminum, and iron) and austenitic stainless steel (iron, chromium, and nickel, among others). Both alloys are paramagnetic, which means they are not attracted by magnets. But if you mix them, you get what's called a "soft magnetic material" ferromagnet, which is attracted to a permanent magnet. 
 
The researchers used the two paramagnetic materials to create a gradient alloy. They used an InssTekMX-1000 3D printer, which works by depositing material using directional energy action, feeding a powdery material, and melting it with a laser at the same time. The resulting materials exhibit varying degrees of ferromagnetic properties, depending on the proportions of the components. 
 
The researchers also theorized that the atomic structure of the alloy contributes to the expression of ferromagnetism in the alloy: although both materials have so-called face-centered cubic crystal structures, the combination results in a magnetic body-centered cubic structure. 
 
Gradient soft magnetic alloys can be used in mechanical engineering, for example, in the production of electric motors. The results also show that the method of surface treatment of materials using directional energy action can not only obtain gradient materials using 3D printing but also discover new alloys. The technology is efficient and suitable for the rapid production of large parts.
 
3D Printing powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest 3D printing powder price, you can send us your inquiry for a quote. ([email protected])
 
3D Printing powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing powder, please feel free to contact us and send an inquiry. ([email protected])

 

Gas supplies have been in short supply because of the conflict between Russia and Ukraine.  Combined with the situation that other renewable sources cannot produce enough electricity, electricity prices have soared in many parts all over the world. For this reason, I assume the supply and prices of the 3D printing metal powder would keep being influenced by the high energy prices.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…