The European Union is seeking to boost energy cooperation with African countries to help wean them off dependence on Russian gas imports.
Bloomberg said, recently, according to a draft EU file, African countries, especially in western Africa Nigeria, Senegal and Angola have a large untapped liquefied natural gas (LNG), the European Commission will adopt this file about enhanced external energy supply later this month, as part of plans to reduce dependence on Russian energy.
Because of the ever-changing international situation, the supply and prices of international bulk 3D printing metal powder are still very uncertain.
What Powder is Used for Metal 3D Printing?
Stainless steel (17-4 PH, 316L, 304)
Tool steel (H13, A2, D2)
Special alloy (Inconel iron alloy, cobalt-chromium alloy, etc.)
Aluminum (4047, 6061, 7075)
Steel 3D Printing
Steel is the most common metal material for 3D printing. Its strength, ability to convert into 3D-printed metal powder, relatively low cost, and post-processability make it a material that can be used in many applications. Most types of steel can be printed: the two most common are stainless steel and tool steel. Not all steel is often printed -- alloy steel, the most common conventional manufacturing method, is rarely printed. Due to their lower conventional manufacturing costs and poor material properties, they are of low value as printing materials.
Stainless steel is tough, hard steel with excellent corrosion resistance due to its significant chromium content (at least 12% and often up to 18%). They come in two different varieties, austenite and martensite.
Austenitic stainless steel is the most common type of stainless steel. They are corrosion resistant and can be machined and welded, but not heat treated. 303 and 304 are the most common austenitic stainless steel types, while 316L is the variant that maximizes corrosion resistance.
Martensitic stainless steel is much harder than austenitic steel but is more brittle and less resistant to corrosion. Taken as a whole, they lack the versatility of austenitic steels -- however, they can be heat treated and precipitated hardened. They are best when you need hard stainless steel. 17-4 PH is a particularly useful martensitic stainless steel that can be heat-treated to suit a variety of material properties -- it is also the most common martensitic steel, although others have been printed (e.g.420).
Tool steel is named after its core application -- all kinds of tools. They contain carbides, extremely hard compounds that are essential for their ability to cut, grind, press, shape, or form. In general, they are very hard, durable, and can be used at high temperatures. Tool steels are classified according to the AISI-SAE classification system and classified into types according to function. The three most common types of metal 3D printing are A series, D series, and H series tool steels.
A Series tool steels are excellent general-purpose tool steels -- they balance wear resistance and toughness and are machinable. There are eight a-series tool sheets of steel, the most common of which is A2. It is versatile tool steel, usually used in the manufacture of punches and dies, but can be used in a variety of applications.
D Series tool steels are optimized for wear resistance and hardness. They are not particularly tough and are only used for cold working applications. The most common variety of d-series tool steel is D2 -- it's used in all kinds of cutting tools, from blades to industrial cutting tools and even cutting tools.
H Series tool steels cut and shape materials at high (or circulating) temperatures. They do not wear as well as A or D series tool steels at low temperatures but retain their strength and stiffness well at high temperatures. Although there are many types of H-series tool steels, H13 is the most common type for 3D printing. It combines excellent toughness, wear-resistance, and heat resistance, making it good general-purpose tool steel, optimized for high temperatures (hot working).
Titanium 3D Printing
While titanium is by no means a common material for routine manufacturing, its unique properties and high base cost make it an ideal choice for 3D printing. It is strong, light, heat resistant, chemical resistant, and biocompatible. Although several different types of titanium can be printed, one is by far the most common: Titanium 64 (Ti-6Al-4V).
Ti64 is the most common type of titanium used in 3D printing and conventional manufacturing. It has an excellent strength-to-weight ratio and can be heat treated to further enhance strength. The material also performs well in harsh environments due to its corrosion and heat resistance. As a result, it is widely used in aircraft (missiles, rockets, aircraft) medicine (as orthopedic implants), and other places that favor a high strength-to-weight ratio.
Aluminum 3D Printing
Aluminum is notoriously difficult to print. As a result, it is a relatively uncommon printed material, although very common in traditional manufacturing. The variety printed is usually cast grade aluminum, rather than the more common machinable types, such as 6061 or 7075. These cast-grade aluminum alloys all have a significant (up to 12%) silicon content and are weaker and less hard than 6061. It's not immediately clear when aluminum will be more readily used as a material for 3D printing, but until then, materials like steel and titanium have achieved similar strength-to-weight ratios when printed using open-hole fillers.
In addition to more common metals, 3D printers can make parts from alloys that are particularly suited to harsh environments. These "superalloys" -- metals with high strength, heat resistance, good surface stability, and resistance to corrosion or oxidation -- can be used in a variety of high-performance applications. Two subgroups are most common: Inconel and cobalt-chromium.
Inconel is the most common and well-known proprietary nickel alloy. It is a very strong, hard, and corrosion-resistant material used in places such as turbines, engine seals, and rockets. There are two main formulas for 3D printing: Inconel 718 is stronger, and Inconel 625 is more heat resistant. Both materials are expensive to process traditionally, making 3D printing a cost-effective alternative to manufacturing high-fidelity parts.
Cobalt-chromium is a superalloy known for its biocompatibility, high strength-to-weight ratio, and corrosion resistance -- it's essentially a higher-grade, more expensive version of titanium. Like Inconel, it is used in turbines and other harsh environments. Unlike Inconel, it can be used in medical applications as an orthopedic or dental implant.
3D Printing Powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest 3D printing powder price, you can send us your inquiry for a quote. ([email protected])
3D Printing Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing powder, please feel free to contact us and send an inquiry. ([email protected])
The United States urges the U.N. Security Council to impose additional sanctions on North Korea in response to its latest ballistic missile launch, including a ban on tobacco and oil exports to North Korea and a blacklist of the Lazarus hacking group.
The United States circulated the draft to the 15 members of the Security Council this week. It was not immediately clear if or when a vote would take place. A resolution requires nine "yes" votes and no vetoes from Russia, China, France, Britain, or the United States.
Russia and China have already voiced opposition to tightening sanctions in response to Pyongyang's launch of an intercontinental ballistic missile last month -- the first since 2017.
U.S. and South Korean officials and analysts also say there are growing indications that North Korea may soon conduct its first nuclear weapons test since 2017, too.
The U.S. -drafted U.N. resolution would expand the ban on ballistic missile launches to include cruise missiles or "any other delivery system capable of delivering a nuclear weapon."
The deal would halve crude oil exports to North Korea to 2 million barrels a year and refined oil exports to 250,000 barrels a year. The resolution also seeks to ban North Korea's export of "fossil fuels, mineral oils, and their distilled 3D printing metal powder are estimated to be influenced by international political situation changes.
Tungsten disulfide is a layered material with remarkable surface effects, electron mobility, thermochemical stability and high electron density of states. It has been widely used for lithium and sodium storage.…
High-silicon aluminum alloy is a binary alloy composed of silicon and aluminum. It is an alloy material mainly used in aerospace, space technology and portable electronic equipment.…
Zinc oxide is an oxide of zinc, the chemical formula is ZnO. It is insoluble in water, soluble in acids and strong bases.…