Aluminum carbide can be described as a green-gray, powder with an Al4C3 molecular formula. It is commonly used in metalurgical and catalytic processes.
Particle Size: -325mesh
Purity: 99%
Aluminum Carbide Al4C3 Pulp:
Aluminum carbide
It is an organic compound.
Aluminum carbide
formula
It is
Al4C3
. Hygroscopic. Yellow-gray or green-gray, crystal block or powder. It is a high-temperature decomposer and can be broken down into aluminum hydroxide and methane in cold water. Al4C3 crystals have a hexagonal structure.
Aluminum carbide
Al4C3 stands for aluminum carbide. The color is light yellow or brown and can be found in crystals. At temperatures above 1400°C, it is very stable. It is decomposed in water and produces methane.
Aluminum carbide
This crystal structure is unusual and consists of Al2C2 and Al2C2 layers. The tetrahedral structure is formed when each aluminum atom has been coordinated to four carbon atoms. Two binding environments exist for carbon atoms. There is one, a deformed Octahedron with 6 Al Atoms at 217pm. Another is a bipyramid triangular structure with four Al atoms at 194-194 PM and a fifth Al at 221 AM.
In industrial calcium carbide, there is an impurity of aluminum carbide. As a result of corrosion of graphite, aluminum carbide forms in electrolytic aluminum manufacturing.
Composites of metal matrix based on aluminum reinforced with non-metal carides (silicon carbide and boron carbonide, for example) are called metal matrix composites. Aluminium carbide is often formed when carbon fibers are made. It reacts with the aluminum matrix at 500°C. For carbon fiber, you can coat the fiber with calcium carbonate to improve the fiber's wettability or chemical reaction inhibition.
Aluminum carbide
Most quantities are usually immediately available. Carbides refer to compounds that have one or more carbonatoms as the anion. Most metals, including indium, gallium and others, can make carbides. Similar to diamonds, carbides are fire-resistant, heat resistant, and strong enough to be used as coatings for drill bits. These carbides often combine toughness with other desirable properties, such as low thermal expansion, electrical conductivity, and wear resistance.
To receive the most current information, send us an inquiry
aluminum carbide price
Please fill out the form below if you wish to
buy Aluminum Carbide Powder
In bulk.
Aluminum Carbide Powder Al4C3?
produced?
The direct reaction between aluminum carbonide and carbon is what makes aluminum carbide.
4 Al + C-Al4C3
This reaction uses alumina but is less advantageous because it produces carbon monoxide.
2 Al2O3 +9 C-Al4C3+6 CO
Al4C3 can also be formed from silicon carbide when it reacts to aluminum. The mechanical use of SiC is limited by this conversion, as Al4C3's brittle nature makes it less useful than SiC.
4 Al + 3 SiC -Al4C3 +3 Si
The chemical reaction of silicon carbide with molten aluminum results in a layer of aluminum carbonide that is formed on silicon carbide particle surfaces. However, this reduces the material's strength and increases its wettability. It is possible to reduce the tendency of silicon carbide particles by either coating them with an appropriate oxide or nitride, or pre-oxidizing them to create a silicon dioxide layer.
Aluminium-aluminum caride composite materials are made through mechanical alloying, mixing graphite powders and aluminum powder.
Technical Parameters of Aluminum Carbide Powder Al4C3 Powder
Code
|
Chemical Composition
|
Article
|
<=
|
Al
|
C
|
Si
|
P
|
S
|
Fe
|
Mg
|
Al4C3
|
79-81
|
19-21
|
0.20
|
0.03
|
0.03
|
0.20
|
0.5
|
Particle size
|
As per customers' request, 60 mesh, 325 mesh and -60 mesh
|
Aluminum Carbide Al4C3 Pulp :
The use of aluminum carbide in metalurgical, catalyst, and methane production is common. Other applications include:
1. When combined with silicon caride, the finely dispersed aluminum carbonide particles within the aluminum matrix decrease the tendency for the material to creep.
2. Aluminium-aluminum carbonide composites can be created by mechanically alloying, grinding aluminum particles and graphite together.
3. High-speed cutting machines can make aluminum carbide an abrasive. It is very similar to that of topaz in hardness.
4. For example, fireworks can use aluminum carbide to create fireflies.
Aluminum Carbide Al4C3 powder storage conditions:
Aluminum Carbide Al4C3 Powder
Dispersion and use effects of titanium tin-carbide Ti2SnC should be preserved in vacuum bags and in cool dry areas. The titanium Tin Carbide cannot be exposed. Ti2SnC powder must be kept away from stress.
Packing and Shipping of Aluminum Carbide, Al4C3 powder :
We offer many packing options, which depend on the amount of titanium tin carbonide Ti2SnC.
Aluminum Carbide Powder Al4C3 Packaging:
You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.
Aluminum Carbide Al4C3 Powder shipping:
Could be sent by sea or air as soon as possible after receipt of payment.
Seguesec advanced materials Nano Technology Co. Ltd. (Seguesec), is a trusted supplier and manufacturer of chemicals and Nanomaterials. With over 12-years experience, Seguesec has been providing high-quality chemical products.
High-quality products are what you want
Aluminium carbide powder
Please feel free and contact us to make an enquiry. (
brad@ihpa.net
)