Trending

Carbide powder

  • 0
  • 0

High Purity Zirconium Carbide ZrC Powder CAS 12070-14-3, 99%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. It's usually produced by sintering. Size of the particle: -325mesh
Purity: 99%

Zirconium Carbide Pulver:
Zirconium carbide ZrC It is used commercially to cut tooltips. It is often sintered. Zirconium carbide It is hard. Zirconium carbide melting point 3504degC Zirconium carbide Point boiling Temperature is 5100degC The apparent density of the material is 6.70 g/cm3. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, containing either nitric acid (or hydrogen peroxide). At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700°C in the air to create zirconia. You should not mix it with water.

ZrC powder It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity at 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) or WC (15.8g/cm3). ZrC appears to be suitable in reentry, rocket/hyperjet and supersonic aircraft where high density is a critical requirement.

As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.

To receive the most current information, send us an inquiry Zirconium carbide price Please fill out the form below if you wish to buy Zirconium Carbide ZrC Powder In bulk.

Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:
Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, small particles, uniform distribution and high specific surface activity. High melting point, high strength, corrosion resistant high-temperature material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.

Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:
Name of Product MF Purity Particle Size Crystal Form SSA The color of the sky
Zirconium Carbide Nanoparticles ZrC 99% 20nm Cubic 11m2/g Black

It is simple. Zirconium Carbide ZrC Powder produced?
Zirconium carbonide can be made in many different ways. A carbothermal reaction is one way to make zirconium carbide. This produces powder. By sintering ZrC at temperatures higher than 2000°C, dense ZrC is possible. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.

You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.

Chemical vapor deposition (CVP) is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.

ZrC cannot be used if it has a lower oxidation rate than 800°C. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrC, ZrB2, and ZrC,ZrB2-SiC were the two most popular composite materials. These composite materials are capable of working at temperatures above 1800 degrees Celsius. This situation can be improved by using another material, such as TRISO fuel particles as a barrier.

Applicaciones Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used to make zirconium tetrachloride and zirconium carbide. Zirconium carbonide can be used in an incandescent filament. It's primarily used now as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has high temperatures oxidation resistance and high strength. It also exhibits high thermal conductivity, toughness, and high toughness. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
Coating material
As refractory coats in nuclear reactors, ZrC is not used. It is sensitive to radiation and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide particles and nuclear fuel. In a fluidized-bed reactor, superheated chemicalvapor deposition usually results in coatings. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
Concrete tools
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-valued high-temperature material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Nanostructured parts
Zirconium carbide nanoparticles may be used in the metalurgical, chemical and aerospace industries. The textile industry can use it to produce nylon, fiber, and carbide thermostatic fabrics. They are also used in composites for metal substrates and ceramics.

Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
There are many options for packing, which all depend on the quantity of zirconium nanoparticles.
Zirconium carbide nanoparticles packing: You can vacuum pack 1kg/bag or 25kg/barrel.
Shipment of Zirconium Carbide Nanoparticles could be shipped by sea or air as soon as payment receipt is received.


Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global chemical material supplier and manufacturer. With over 12-years of experience, Whatsontianjin has been providing high-quality chemicals, Nanomaterials, such as boride, nitride, graphite, sulfide, 3D printing powders, etc.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. ( brad@ihpa.net )

Zirconium Carbide Properties

Other Titles zirconium(IV) carbide, methylidynezirconium, ZrC powder
12070-14-3
Compound Formula ZrC
Molecular Weight 103.23
Appearance Gray Powder
Melting Point 3532
Boiling Point 5100
Density 6.73 g/cm3
Solubility of H2O N/A
Exact 102.912529

Zirconium Carbide Safety & Health Information

Signal word Danger
Hazard Statements H228-H302-H312-H332
Hazard Codes F, Xn
Risk Codes 11-20/21/22
Safety statements 16-27-33-36/37/39
Transport Information UN 3178 4.1/PG2

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…