Trending

Oxide Powder

  • 0
  • 0

High Purity Indium Tin Oxide ITO Powder, 99.9%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



ITO can be described as an N-type semiconductor-indium zinc oxide. ITO, an indium Tin Oxide semiconductor transparent conductive film has usually two performance indicators, light transmittance or resistivity. Particle Size 20nm
Purity: 99.9%

More information about Indium Tinoxidide ITO powder:
ITO Indium tin oxide Oder Indium doped tin oxide A ternary combination of different proportions of indium or tin and oxygen. You can call it a ceramic, or alloy, depending on the amount of oxygen. Commonly encountered indium tin oxide As an oxygen-saturated compound, it contains 74% in, 18%O2 and 8% Sn. Because oxygen-saturated compositions tend to be more common than unsaturated, they can also be called oxygen-deficient IOTO. It is translucent and colorless with a bulk that is pale yellow to grey. The thin layer acts almost like a metallic mirror when it is visible in the ultraviolet region.

Indium tin oxide Because of its high electrical conductivity, optical transparency, and easy deposited thin films it is one of most commonly used transparent conductive oxides. Conductivity and transparency must be balanced, as increasing thickness and increasing concentrations of charge carriers can increase conductivity but decrease transparency.

Indium tin oxide films They are typically deposited on the surface using physical vapor deposit. It is usually used electron beam or several sputtering methods.

ITO is an oxide mixed of indium and Tin. The melting point of ITO varies according to its composition. It can range from 1526 to 1926 °C. It is composed of ca In4Sn. This is an n type semiconductor that has a wide bandgap, approximately 4 eV. ITO can be seen through and exhibits high electrical conductivity. These characteristics are great for touch screen applications like mobile phones.

To receive the latest information, send us an inquiry Indium tin oxide price Please fill out the form below if you wish to buy Indium Tin Oxide ITO Powder In bulk.

Indium Tin Oride ITO Powder's Performance
ITO stands for Indium Tin Oxides.
Nano-indium Tin Metal Oxide is very transparent and conductive and can block harmful ultraviolet and infrared radiations. Indium tinoxid is applied to glass, plastic, and electronic screens as a transparent, conductive film. This reduces the harmful effects of electromagnetic radiation and UV and infrared.
Sn-doped ITO3 (or oxide conductive) films have the highest transmittance. It also has the most conductive properties. Fine patterns can be easily etched in acid solution. The light transmittance for this film is over 90%. ITO has a transmittance of 1:9.

Technical Parameters of Indium Tin Oride ITO Powder
Certificate of ITO Nanoparticles-ppm(In2O3:SnO2=90wt%:10wt%)
Purity Al Sb Cd Cu Fe Pb Ni Si Zn Co As P Ca Mg Bi
99.99% 1.88 3.30 1.00 2.55 3.50 9.38 1.00 5.88 2.55 0.58 1.48 0.52 1.39 2.49 9.12

It is simple. Indium Tin Oxide ITO Powder produced?
The ITO powder is usually prepared by oxidizing indium or metal tin to produce indium dioxide powder and indium tin tin oxide powder. Next, the indium oxide powder will be mixed with the tin oxy powder. As the controlling conditions, metal indium, metal tin and mixing speed are not always synchronized, the ITO powder can be difficult to make. The ITO film's quality is affected by the large particle sizes of the tin powder. To solve the issue of uniformity in ITO powder, co-precipitation is another method. To dissolve indium and tin metals, this method employs nitric acid. The mixture is then mixed with tin and indium, according to their ratio. Ammonia then serves as co-precipitator. The co-precipitated, or hydroxide can be precipitated, followed by calcination for indium tinoxide.

Applicaciones Indium Tin Oxide ITO Powder:
ITO, an optoelectronic substance that is widely used in both industry and research, can be described as Indium Tin Oxide (ITO). ITO can also be used in flat panel displays and smart windows. ITO is used to make the glass substrate. This helps reduce energy consumption.

The ITO green belt This is used to make fully functional, flexible and electroluminescent lamps. Additionally, it can be used for producing fully functional and adjustable electroluminescent lamps. ITO Film This film can be used as an antireflective coating in both liquid crystal displays and electroluminescence.

ITO is used commonly to create transparent conductive coats for display (such as OLED and plasma displays, touch panels, liquid crystal displays, OLED screens, OLED monitors, OLED monitors, OLED displays, OLED displays, OLED displays, OLED displays, OLED displays, OLED displays, OLED displays, OLED displays, etc.). ITO film also serves as an organic light-emitting device, solar cell, antistatic coatings, and shielding. ITO (or hole injection layer) is used in organic light emitting diodes.

ITO coated glass ( indium tin oxide glass ) is part of the TCO (transparent conduct oxide) category. ITO glass It has low resistance to light and good transmission of light.

It is used to remove the ITO film from the windshield. By applying a voltage on the film, heat is created.

ITO coating ITO can be found in many optical coatings. There are many other applications for ITO, including gas sensors and anti-reflective coats. Electrowetting on dielectrics is also possible. Finally, Bragg reflectors to VCSEL Lasers can be used. ITO is used infrared as a reflector to low emissivity glass panes. ITO was first used in the Kodak DCS 520. Later Kodak DCS cameras utilized ITO to increase the response time of the blue channel.

ITO thin film strain gages operate at temperatures of up to 1400°C. They can even be used in extremely harsh environments, such as jet engines or gas turbines.
Indium Tin Oride ITO Powder Storage:
Indium Tin Oxide should always be kept in a dry, cool, and sealed environment. It cannot be exposed to air.

Shipping and Packing of ITO Powder indium Tin Oxide:
You can pack it in two plastic bags with the inside.
Indium Tinoxidide ITO Powder packaging: Vacuum packing 100g, 500g and 1kg/bag. 25kg/barrel. Or as you request.
Indium Tin Oride ITO Powder shipping can ship out by sea or air as soon as you receive payment receipt.


Designerstudiostore advanced material Nano Technology Co. Ltd. (Designerstudiostore) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
You can contact us to request high-quality ITO powder. (brad@ihpa.net)

Indium Tin Oxide ITO Powder Properties

Other Titles ITO powder indium Tin Oxide.
In2O3 :SnO2 - 90:10 Wt%, C.A. 71243-84-0. In.O.Sn. In1.69Sn0.15O2.85.
50926-11-9
Compound Formula In2O5Sn
Molecular Weight 428.34
Appearance From pale yellow to greenish powder
Melting Point 1526-1926 degC
Solubility In Water Insoluble
Density 7.14 g/m3
Purity 99.90%
Particle Size 20nm
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact 429.684524
Monoisotopic 429.684524

Indium Tan Oxide ITO powder Health & Safety Info

Safety Notice Alert
Hazard Statements H315-H319-H335
Flashing Point N/A
Hazard Codes Xi
Risk Codes 36/37/38
Safety statements 26
RTECS # N/A
Transport Information N/A
WGK Germany 3

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…