High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

Iron Oxide Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is the most common form of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of the main iron oxides found naturally in the mineral magnetite. It can be used to suspend iron dioxide in applications, biomedicine and agriculture. Pulsed iron oxide's advantage is its ability to be modified using a wide range of inorganic or organic compounds (such starch, polyelectrolyte, and non-ionic detergent), so it can be used in more applications. Magnet iron oxide can also be applied in biomedical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the usefulness of iron oxide in macro scale applications and its reactive properties are important, the spontaneous combustion potential is also present when the particles are smaller in size at the nano and micron scales. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulver in bulk, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be red or reddish brown in color. Odorless. Water, organic acids and solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: the a-type, which is positive magnetic and the g-type that's diamagnetic. Dry-produced products generally have a fineness below 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.12 5.24. A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 cake:

TEST ITEM	H130	H190
Content Fe2O3>=%	96	96
105degC volatile matter <=%	0.9	0.9
Hydrotrope <=%	0.25	0.25
Water-soluble sulfate and chloride=%	0.18	0.18
Residue on Sieve (10um)mesh	0.45	0.45
Water suspension pH value	5.0-7.0	5.0-7.0
Oil absorption (ml/100g).	20	20
Color (as measured against the sample)	Micro-	Micro-
Tinting strength in percent	99	99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O3 are available. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous sulfurate solution with excess sodium hydroxy solution. (The alkali excess must be 0.040.08g/mL). Then you can pass the mixture in to reddish-brown ferrichydroxy colloidal solution. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 7585 the ferrous Sulfate reacts and forms iron oxide.
2. Dry Method
Iron reacts with Nitric acid to produce ferrous nitrate. This is then cooled and crystallized. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as feedstock in the iron (III) oxide and steel industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder known as "jeweler’s red", "red rouge" or just "roie" is an extremely fine form of the mineral. It's used to polish metallic jewellery and lenses. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for the exceptional finish that it can provide. Rouge slightly marries gold and makes it look better. The rouge can be sold in powder or paste form. It is also laced on polishing cloths and solid bars with a grease binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", or 101. Some of these, like Pigment Red 101 or Pigment Brown 6, can be used as pigments. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetic use by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage and record media. This included magnetic disks (for data retention) and magnetic cassette (used in audio/video recording and data storage). The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or using alternate crystal phases, such as bFe2O3.
6. Me dicine
Calamine lotion is used to reduce mild itching. This is what gives the lotion its pink color.

Iron Oxide Fe2O3 Powder Storage Conditions:

Iron Oxide Fe2O3 Powder should be kept in a dry, cool environment. It should not be exposed to air.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in two plastic bags with the inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g, 1kg/bag or 25kg/barrel. Or as requested.
Shipping information for Iron Oxide Fe2O3 powder Shipping: received payment. Shipment by Sea, Air, or Express as Soon as Possible


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical materials. They have over 12 years of experience providing nanomaterials such as graphite powders, boride powders, nitride, graphite powders, sulfide powders, 3D printing powders, etc.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)