Trending

Application of foam concrete and animal protein foaming agent concrete additives

Applications of foam concrete Due to its good characteristics, foam concrete is widely utilized in energy-saving wall products and has also been utilized in other elements. Today, the primary applications of foam concrete in my nation are cast-in-pla…

More>>

How to use gas gel powder as concrete additives

What exactly is aerogel powder? Aerogel powder can be weighed at 3kg/m3. Silica aerogel is the most commonly used type of aerogel powder. This aerogel was created first by Kistler and friends, an American scientist. You can find many types of aerogel…

More>>

Uses and usage of various concrete additives

Dry and large flow concrete is used to solve the problems of unreasonable gradation of sand and stone, excessive stone powder, machine-made sand, bottom glue, low-grade large flow concrete, and poor waterline and workability after pumping and coagula…

More>>

3-12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials (3)

In this article, defoamer, anti-shrinkage agent, preservation agent, and inhibitor will be talked about.…

More>>

12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(2)

This article will talk about coagulant, retarder, delayed coagulant, foaming agent, air entraining agent, and aerating agent.…

More>>

12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(1)

The properties and varieties of concrete additives for refractories, especially refractory castables, ramming materials, plastics and other amorphous refractories are different.…

More>>

Introduction to Concrete Additives (2)

In this article, the set retarder, the air-entraining agent, and the accelerating agent are going to be talked about.…

More>>

Production and Applications of Naphthalene Sulfonate Water Reducing Agent

Naphthalene Sulfonate Water Reducing Agent is the product of naphthalene sulfonated by sulfuric acid and then condensed with formaldehyde, which belongs to an anionic surfactant.…

More>>

Related news

Sodium Allyl Sulfonate CAS 2495-39-8

Sodium Allyl Sulfonate (SAS) is a new anionic sulfate surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stabilty.Active matter content 95% About Sodium Allyl Sulfonate Sodium Allyl Sulfonate (SAS)…

More>>

Laurylamine ethoxylate ether CAS 61791-14-8

With the increase of EO number, the consistency and water solubility of raw materials increase continuously. About Laurylamine ethoxylate ether: According to the number of EO, they are classified into AC-1202, AC-1205, AC-1210, and AC-1215 is a…

More>>

PPG Poly propylene glycolr

Poly propylene glycol is divided into various types according to different molecular weight, soluble in toluene, ethanol, trichloroethylene and other organic solvents. About Poly propylene glycol: PnB Poly propylene glycol is a non-ionic surfacta…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder