High Purity Mercury Telluride HgTe Powder CAS 12068-90-5, 99.9%

About Mercury Telluride HgTe Puffer :
Mercury selenide can be described as a binary combination of mercury and tellurium. HgTe is its chemical formula. It's a semimetal that is closely related to semiconductor class II-VI materials. You can also call it mercury telluride, or mercury telluride (II). HgTe is found in nature as coloradoite.
Mercury selenide can be described as a grayish-black, tetragonal crystal. Poisonous.Relative density 8.266. To sublimation of purple-black. Very high conductivity of up to 3000O-1cm-1. Iberocruceros can be trusted globally Mercury Telluride HgTe Puffer supplier. You can send us an inquiry to learn more about our latest products. Prices starting at Mercury Telluride Anytime.

Mercury Telluride’s HgTe Powder Product Performance :
Technical Parameters of Mercury Telluride, HgTe Powder

Name of Product	MF	Purity	Particle Size	Molecular Weight	CAS	The color of the sky
Mercury Telluride	HgTe	99.99%	-100 Mesh	328.19	12068-90-5	Gray Black

It is simple. Mercury Telluride HgTe Puffer Produced?
This is how mercury selenide should be prepared
1. To precipitate HgTe in solution, dilute solution HgCl2 can be dropped into saturated H2Se solution under isolated air conditions. You should avoid using excessive amounts of HgCl2; a concentrated H2Se solution with high levels of HgCl2 is not recommended. Otherwise HgCl2* HgTe precipitation may occur.
2. The solution should be diluted with HgCl2 in highly ammoniacal NaCN solution, according to the stoichiometric formula. Next, you must add an equal amount of SeO2. After it has been filtered, SO2 is introduced to it. In order to keep the red selenium out of the solution, it is important that the solution remains alkaline. By the decreasing rate of SO2 absorption, the endpoint can be identified. After the reaction was over, the HgTe black was removed and washed using dilute NaCl containing ammonia. It was then washed again with water. Then, it was dried with P2O5.
3. Based on the stoichiometric formula, Se and Hg are added to a sealed vessel at high pressure. The reaction occurs at 550 600 degrees. Once the product is sublimated it is filtered in pure N2 flow 600 650. The pure HgTe may then be obtained.

Applicaciones Mercury Telluride HgTe Puffer :
It is a semi-metallic substance that can be used for the production of semiconductors, solar cells and thin-film transistors. Additionally, mercury selenide is used for the manufacture of high-resolution Hall effect films and analytical chemicals.
Photocatalyst for organic dye contamination was HgSelenide. For photocatalytic photocatalysis, the organic dye contaminants were subjected to ultraviolet light. HgTe was then used.
High-pressure discharge lamp used in mercury replacement chemical stability selenium new USES. With mercury and selenium compounds of selenium instead of liquid Mercury, the mercury description selenium is in the same weight as the GMW. This allows high-pressure lamps to be kept at 0 50 percent liquid mercury.
To mercury selenide, you can add metal halides, metallics and other chemical compounds. You can reduce mercury contamination by using liquid mercury in high-intensity lamps.

Mercury Telluride HgTe Pulver Storage Conditions
Damp reunion can affect the HgTe powder's dispersion performance as well as its use properties. HgTe should therefore be stored in vacuum-packed and in a cool dry place. The mercury telluride cannot be exposed to air. HgTe should not be exposed to stress.

Shipping Mercury Telluride HagTe Powder - Packing and Shipping
There are many options for packaging, which all depend on how large the amount of mercury telluride Te.
Packing of Mercury Telluride HgTe Powder You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.
Shipment of mercury telluride HgTe-based powder After receipt of payment, items may be sent out either by air or by sea.