Trending

News

  • 0
  • 0

Status of animal protection and air forwarder in international shipments

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



According to reports, a few days ago, a case about the alleged abuse of animals in livestock transportation ended in the captain's conviction, and the shipowner and the beneficiary cargo owner were not criminally punished.

In January 2016, the Statesman was scheduled to transit from Stanley, Tasmania, to Welsh Harbour, Victoria. The ship was carrying 207 head of cattle. It is reported that the weather conditions were very bad then, but the "Statesman" continued to sail, and the situation turned out to be worse than predicted.

Three large waves rushed across the side of the ship and knocked out cattle on the open deck, killing ten cattle and making it impossible for the crew to reach the deck to help any livestock. A further 59 cattle died of injuries upon arrival at the port. Veterinarians could not assist until six hours after the boat arrived, increasing the cattle mortality rate.

In 2018, the vessel's owner, LesDick, the operating company LD Shipping, Graeme Pretty, an employee of slaughterhouse HW Greenham & Sons, and John McGee, the captain of the Statesman, were all sued for animal cruelty (including aggravated animal cruelty and management practices that could lead to unreasonable results).

Owner Les Dick pleaded not guilty, and before the trial began, he was diagnosed with a serious illness. This led to delays in the trial, with shipowner Les Dick reaching an agreement with prosecutors in 2020 to leave the livestock transport business. He passed away in February 2021. The operating company, LD Shipping, went into liquidation before being convicted, and its assets were sold to other operators.

This put Graeme Pretty, an employee of the slaughterhouse, and John McGee, captain of the Statesman, on trial. Later, the slaughterhouse's defense lawyers dropped the charges and succeeded. John McGee, the "Statesman" captain, became the sole defendant.

Last week, Captain John McGee pleaded guilty to one count of improper use of animal management methods that could lead to unreasonable results. His defense attorney told the court that at the time, Captain John McGee was under intense pressure from the ship's owner, Les Dick, to set sail. While the captain did have the final say, pressure from the owner influenced his decision. The lawyer stressed that the weather was worse than predicted and that the animals did not suffer in any way.

It is reported that Captain John McGee will face a sentence in January 2023. The charge carries a maximum penalty of 12 months in prison.

According to the data, Tasmanian ferry operator TT-Line was similarly charged in 2018 for an incident involving the death of 16 foals. Although the court ruled that TT-Line had 29 minor animal welfare violations, the company was ultimately acquitted.

Factors affecting freight forwarder air forwarder Freight transportation

In international freight transport, one of the most concerning issues is the price of freight transport. The cost is directly related to the cost of transportation. Because many exporters do not understand the price of transportation very much, and often have a lot of extra spending, then today to understand the factors of the price of international freight transportation? Do You Need Freight Forwarders? China DDP for World is a full-service and shipping forwarder dedicated to assisting our clients in focusing and growing their businesses. Send an Email to info@ddpforworld.com and get the latest freight price.

The transportation prices are different for different air forwarder

In the general international trade process, the price of transport according to different modes of transport, price is also different. International freight rates are divided into sea freight, air freight and rail freight.

The specific air forwarder freight rate can also be subdivided. For example, rail freight can be divided into passenger freight and freight. Shipping rates are also divided into tramp rates and liner rates. Tramp rates are also affected by market supply and demand relations at that time, while liner transport costs are relatively fixed. Airfreight can be divided into general goods, designated goods and special goods, and the specific transportation price is also determined according to the weight of transportation, at the same time, even if the volume is small, the weight is also counted by weight, but if the opposite is large, small weight, also according to the specific volume to calculate.

The choice of international logistics, the quality of logistics will affect the seller's store score, but also affect customer satisfaction rate.

Logistics advantages of the air forwarder in the destination country and region

In Eastern Europe, DHL has advantages in Romania, Bulgaria, Moldova, Hungary and other places while EMS has advantages in Greece, Russia, Turkey and other places. Western Europe, Northern Europe, southern Europe can use DHL international express, TNT international express, these two kinds of customs clearance capacity. TNT has a clear advantage in the Netherlands and Belgium.

For Canada, the United States and other American countries, FedEx, UPS and DHL are all suitable for their strong customs clearance capacity and fast time.

Applicable to Asia, South Korea, Japan, Thailand and other Southeast Asian countries DHL, FedEx. DHL and FedEx are time-saving, but THE price of DHL is higher. Indonesia also suggests USING DHL because it has a stronger customs clearance capacity.

In Oceania, DHL and UPS aging fast, with high prices; TNT and FedEx have lower prices but relatively few outlets. Particular attention should be paid to the "Made in China" label on the packaging of Australian products.

Middle East express ARAMEX, EMS for Middle East region. Commercial express in Africa is very expensive. In remote areas, IT is suggested to send EMS international express. EMS countries have the strongest customs clearance capacity. The air express air forwarder can reach many countries and regions that commercial express and postal express cannot reach, so the wide range of air forwarder transportation is its advantage.

Factors affecting the shipping price of air forwarder

In the process of international transportation, there are many factors affecting the price of transportation, in addition to some fuel and labor costs, there are many important factors. For example, the nature of the air forwarder, its own value and packaging form, as well as stowage factor and transporter's requirements for transportation, etc. There will be some fixed costs during the use of the ship, such as the ship's maintenance insurance and fuel consumption. There is also the change of supply and demand in the air forwarder market. In the transport off-season, transport prices are relatively low, in the transport of the peak season, transport prices will be relatively high.

Contact a professional freight forwarder- DDPFORWORLD - Professional freight forwarder in China

Do You Need Freight Forwarders from China ? Please contact DDPFORWORLD !

DDP for World is a full-service and shipping forwarder dedicated to assisting our clients in focusing and growing their businesses. We do DDP shipping since 2015 by handling home décor, Pet products, battery, power banks, DG cargo, general cargo and Amazon FBA shipping forwarding service. We make your shipping easier and faster by Sea, Air, Express, Truck or Railway. If you have any questions or needs about freight forwarder, please feel free to contact us, we will serve you wholeheartedly.

Email: info@ddpforworld.com

Inquiry us

  • tags

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and laser cladding.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the energy, petrochemical, e-commerce, and electronics indus…