A water-based, organic high-temperature oil lubricating substance is the water-based Boron Nitride Emulsion. It doesn't bond with or infiltrate molten metallic liquids and it can protect surfaces of ceramic utensils or other refractory material.

About Water Based Boron Nitride Emulsion Water Based Boron Nitride Coating. Water-based coatings have excellent lubrication properties and are easy to remove. The high-temperature bonding process and matching high purity BN powder are what create this coating. The combination of high-purity boron oxide particles with inorganic binding creates a superior formulation that can produce a fluid, continuous coating on the surfaces. This allows for excellent adhesion. Also known as the boron nutride lubricant or boron coating.
Boron Nitride coating, an inert organic high-temperature oil lubricating agent that doesn't bond with or infiltrate molten iron, is an inert nitride. The coating protects ceramic vessels and other refractory materials from direct contact with the molten zinc, magnesium, or zinc alloy. This can greatly enhance this type of utensils. Life.
Hexagonal boron Nitride suspension is highly thermally conductive. You can apply it directly to any hot surface, regardless of whether or not you have impregnated molten metallic. It does not react to metals or glass and is therefore stable at higher temperatures. Boron nitride coateds can be used in a liquid that is suitable for brushing. The concentration of the coating can then be adjusted with water until it's suitable for spraying or dipping. If you are interested in purchasing Water-Based Boron Nitride Emulsion, please send us an inquiry.

Properties Water-Based Boron Nitride Emulsion:
Water-based Boron Nitride Emulsion does not pollute the environment or cause harm to human health. Non-toxic, no odor. Boron Nitride coating is heat resistant up to 400-1700. This coating is water resistant, resists salt spray and organic solvents.

How Water Based Nitride Emulsion is made?
Use a gentle brush to apply the paint. You can dilute the paint with distilled water if it is necessary to discolor it.
Spraying: A spray gun, or another similar tool with a pressure between 50-60psi (0.335-0.42MPa) is the best method. Mix the paint well before spraying. Use distilled water to dilute the paint if it is necessary.
Dip coating technique: Use distilled water to dilute the solution if necessary. After two dips it should be dried for forty minutes at 80 degrees Celsius.

Water Based Boron Nitride Emulsion
The boron nitride-emulsions are widely used in the aerospace, military, and petroleum industries. They can be used for high-temperature steampipe, chimney flue and heat exchanger.
Boron Nitride Emulsion is suitable for use in the following fields: aluminum, magnesium, zinc, other alloy castings, gravity/low-pressure cast, forging, and powder metallurgy.
Boron Nitride Emulsion can be used on the casting table, distribution, casting launder and casting table lining. It is also applied to filter box, adapter plate and cast-rolling material. life;
Fine impurities are prevented from getting into the molten material by the boron-nitride-emulsion. It greatly improves the product's quality and reduces the risk of secondary pollution.
Boron nitride Emulsion provides excellent lubricity in high temperature environments and has an exceptional anti-oxidation capability. Even at extreme high temperatures it maintains its unique non-stick, antisticking, anti-corrosion and antioxidation properties.
Other than protecting various refractory material, boron-nitride-emulsions have outstanding anti-chemical and antiadhesion properties in other fields.
It is impossible for most molten and salt metals to make the boron nutride emulsions wet.
Boron nitride is resistant to molten and light metal corrosion.
Very good separation/unusual color in boron-nitride Emulsion.
The Boron Nitride Emulsion is used to extract solidified metal.

Technical Information of Water-Based Boron Nitride Emulsion:

Product Name	Boron Nitride Emulsion
Chemical Formula	BN
Appearance	White Emulsion
Solid Content	10-12%
PH	7-8
Particle Size: D50	<=10um
Density	0.8-1.0 g/cm3 (25)
Viscosity	<=500 mpa.s (25)

Packaging and shipping of water-based Boron Nitride Emulsion
Many types of packing are available depending on the Water-based Borion Nitride Emulsion amount.
Packing of water-based Boron Nitride Emulsion 25kg/barrel
Shipment of water-based Boron Nitride Emulsion A payment receipt can allow for shipping by sea or air as well as express delivery.

Boron Nitride Emulsion Properties
Other Titles	Boron Nitride Emulsion.
	N/A
Compound Formula	BN
Molecular Weight	N/A
Appearance	White Emulsion
Melting Point	N/A
Solubility In Water	N/A
Density	0.8-1.0 g/cm3 (25)
Purity	N/A
Particle Size	N/A
Boling Point	N/A
Specific Heat	N/A
Thermo Conductivity	N/A
Thermal Expansion	N/A
Young's Module	N/A
Exact	N/A
Monoisotopic	N/A
Boron Nickel Emulsion Safety and Health Information
Safety Notice	N/A
Hazard Statements	N/A
Flashing Point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety statements	N/A
RTECS #	N/A
Transport Information	N/A
Germany	N/A

Inquiry us