Trending

New Record The Most Heat-resistant Materials Were Born - Tantalum Carbide and Hafnium Carbide Materials

What is Hafnium Carbide and Tantalum Carbide? Tantalum carbide is a brown powdered metal cubic of the sodium chloride system. The tantalum carbide used today is a sintered cemented carbide grain growth inhibitor. This has an important effect in suppr…

More>>

Controlling the electronic state of two-layer molybdenum disulfide in an origami manner

In recent years, transition metal dichalcogenide was one of the key two-dimensional materials for quantum functional applications. These materials have a honeycomb like graphene but have spin-orbit coupling that allows them to exhibit novel propertie…

More>>

Is Boron a metal or non-metal Whats The Boron Properties and Boron Uses

Is boron a metal?Boron powder does not belong to the metal family, and it is not considered a metal solid because it doesn't have any of the metal's general properties. Boron has the lowest outermost electron count of any non-metallic. It is availabl…

More>>

It is the market to decide whether graphene should continue to heat up or cool down

He believes that the graphene market in China, from a business perspective, is not "hot enough" to "reduce" the fever, and should remain "hot". It is an allotrope in which a single layer (atoms) of carbon forms a hexagonal, two-dimensional grid in…

More>>

What Are The Upmarket Applications for Ultra-fine Alumina Powder

Modern industry cannot function without ultrafine alumina. Alumina powders with ultrafine or fine grain have a different surface electronic structure, and crystal structure, which results in surface effects, and smaller sizes, that cannot be found in…

More>>

Scientists Use the Smoothest Lubricant Raw Materials to Develop WiFi Generating Antennas

British media have reported that scientists made a major discovery - converting radio waves into electricity. This is commonly referred to as power generation via WiFi! We may see battery-free phones, laptops, and even mobile phones in the future. M…

More>>

The Next Profit Margin in The Alumina Industry-Red Mud

In the absence of new countries that can replace the decrease in aluminum demand caused by China's slowdown, the era high profits is expected for the alumina sector. Only the complete utilization of red mud (also known as "the worldwide problem"), w…

More>>

AES Sodium Lauryl Polyoxyethylene Ether Sulfate CAS 9004-82-4

Electrolytes will cause the aqueous to become viscous. AES exhibits excellent decontamination properties, emulsification and foaming abilities, as well as resistance to hard water.Solid Content: 27.5-28%, 68%-72% AES Sodium Lauryl Sulfate Polyoxyet…

More>>

PHES Sodium 2-Propyl-1-heptanol Ether Sulfate CAS 61827-42-7, 50%

The new type of anionic sulfate surfactant, PHES, is an innovative sulfate based surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stabilty.Solid Content >= 50 % About PHES Sodium 2 Propyl-1-heptano…

More>>

FMES Compound Fatty Acid Methyl Ester and Acohol Ether Sulfonate

The FMES surfactant is a type of new sulfate anionic surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stability.Active matter content : 70% Ecosol FMES-28/70 : Ecosol® FMES-28/70, a new type sulf…

More>>

Oleyl amine polyoxyethylene ether CAS 13127-82-7

Oleyl-amine polyoxyethylene is a good emulsifier, dispersing agent, antistatic lubricant, and corrosion inhibitor. It has acid resistance, but poor compatibility with anionic surfactants. Oleylamine polyoxyethylene-ether : The polyoxyethylene r…

More>>

TPM Tripropylene glycol monomethyl ether CAS 20324-33-8

Tripropylene monomethyl ether has a low toxicity and almost no odor. It's completely water soluble, and it has good solubility with a range of non-polar and polar substances. About TPM tripropylene glycol Monomethyl ether : The vapor pressure…

More>>

Related news

Effect of cement temperature on the performance of pce powder

If the compatibility of polycarboxylate superplasticizer and cement is not good, the concrete mixture is prone to some problems, such as segregation, bleeding, greater slump loss, shorter setting time and so on, so that the concrete mixture can not b…

More>>

Why is Copper alloyed with Nickel?

What is copper and nickel alloy called?There are a series of different CuNi alloy, which have different properties and can be used for different purposes, including:Cupronickel: containing 60-90% copper.Constantan: 45% nickel.Monel: at least 52% nick…

More>>

Influences of Concrete Water Reducer on Different Kinds of Cement (3)

In this article, we will talk about the problems when water reducer meets different kinds of cement and solutions.…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder