Trending

GMS Glyceryl monostearate CAS 31566-31-1

GMS Glyceryl monstearate has two phases, 1-MG and 2MG. Mono-glyceride, which is a fatty acid, can be classified into mono-stearate (also called mono-oleate), mono-laurate (also known as mono-laurate), mono-oleate (also known as mono-oleate) and other…

More>>

GlyceryI monooleate; GlyceryI oleate CAS 25496-72-4;111-03-5;68424-61-3

The chemical formula of glycerol monoleate (C21H40O4) is C21H40O4. The following is a list of the most recent articles about Glyceryl Monooleate : A light yellow liquid with a HLB value around 4.0. This is a synthesized product. The molecu…

More>>

Polyglycol Oleate CAS 9004-96-0GML Glycerol monolaurate CAS 142-18-7

Polyglycol Oleate is a non-ionic surfactant with low foam and good biodegradability. About Polyglycol Oleate : Polyoxyl oleate is unstable in strong acid and base. The surfactant has good biodegradability. And it has excellent emulsifying,…

More>>

TPM Tripropylene glycol monomethyl ether CAS 20324-33-8

Tripropylene monomethyl ether has a low toxicity and almost no odor. It's completely water soluble, and it has good solubility with a range of non-polar and polar substances. About TPM tripropylene glycol Monomethyl ether : The vapor pressure…

More>>

ODEA Oleic acid diethanolamide CAS 93-83-4

Oleic acid Diethanolamide exhibits excellent decontamination and emulsification. It also has foam stabilization properties, dispersion characteristics, solubilization properties, antistatic properties, lubrication qualities, corrosion inhibition, wea…

More>>

Sorbitan monooleate CAS 1338-43-8

Sorbitol, or sorbitolanhydride monoleate as it is also called, can be used to make a nonionic surfactant. About Sorbitan monooleate: It can also be used to make a non-ionic detergent. Use as a textile oil agent, dispersant of oil residues, and e…

More>>

PGMS Propylene glycol monostearate CAS 1323-39-3

A non-ionic, white powder or flake, which is insoluble with water but soluble with ethanol and organic solvents. About PGMS Propylene glycol monostearate: A non-ionic, white powder or flake, which is insoluble with water, but soluble with ethanol…

More>>

Sorbitan monopalmitate CAS 26266-57-9

Sorbitol as a raw materials, dehydration closed-loop formation of sorbitol then prepared with palmitic esterification reaction. About Sorbitan monopalmitate: With sorbitol (raw material), the reaction is prepared by dehydrating it and forming sorb…

More>>

DPNB Dipropylene glycol monobutyl ether CAS 35884-42-5

Monobutyl monobutyl dibutyl ether (also known as monobutyl monobutyl alcohol) is a clear liquid that has a faint odor. Relative densities (25) are 0.914 and flash points (opening) are 112.7. This class is low-toxic. Dipropylene Glycol Monobutyl Eth…

More>>

APESA Alkylphenol Ether Ammonium Sulfate Salt , 60%

APESA Alkylphenol Ether Ammonium Sulfate Salt offers better wetting and dispersing abilities, as well as emulsifying.Solid Content 60% APESA Alkylphenol Ether Ammonium sulfate salt: Alkylphenol Ether Ammonium Sulfate Salt possesses good wetting,…

More>>

ETB 2-Tert-Butoxyethanol CAS 2235-54-3

ETB 2-Tert Butoxyethanol Is miscible in most organic solvents. Can dissolve amino, nitro and alkyd resins as well as acrylic and other resins. About ETB 2-Tert-Butoxyethanol: 2-Tertbutoxyethanol replaces ethylene-glycol butylether. Contrary to thi…

More>>

PM Proprylene glycol monomethyl ether

Proprylene monomethyl-ether is an odorless, transparent liquid, which is miscible in water. Its relative density is 0.9234.Solvent, dispersant or diluent. About PM Propylene Glycol Monomethyl Ether: Propylene and ethylene glycol are alcohol ether…

More>>

Related news

Recognized the energy-saving and emission-reduction effects of a 15kva dry-type transformer

In today's growing energy demand and increasingly severe environmental problems, energy conservation and emission diminish have become common worldwide concerns. The 15 kva dry-type transformer is indispensable in this field, and its energy-saving an…

More>>

Effect of cement temperature on the performance of pce powder

If the compatibility of polycarboxylate superplasticizer and cement is not good, the concrete mixture is prone to some problems, such as segregation, bleeding, greater slump loss, shorter setting time and so on, so that the concrete mixture can not b…

More>>

Bismuth Oxide Bi2O3 Powder Supplier

Europe's largest economy, Germany, recently activated an emergency plan to manage gas supplies that the natural gas could be rationed if supplies are disrupted or disrupted by a stand-off over Russian demands to pay for fuel in rubles. German Vice-C…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

High Purity 3D Printing 304 Stainless Steel Powder