Overview of Sodium Silicate Powder

Sodium silicate powder, commonly known as water glass or liquid glass when in solution form, is a compound containing sodium oxide (Na₂O) and silica (SiO₂). It can be produced in various forms including powders, solutions, and solid blocks. The composition ratio between Na₂O and SiO₂ can vary, leading to different properties and applications. Sodium silicate powder is obtained by drying the aqueous solution of sodium silicate.

Features of Sodium Silicate Powder

Versatility: One of the most notable features of sodium silicate powder is its versatility. It finds use in a wide range of industries including construction, detergents, drilling fluids, and fireproofing materials due to its unique chemical properties.

Adhesive Properties: Sodium silicate powder has strong adhesive properties when mixed with water, making it an excellent binder for foundry work, abrasive wheels, and other applications requiring strong bonding agents.

Heat Resistance: It exhibits good heat resistance, which makes it useful in high-temperature applications such as in the manufacturing of cement and refractory materials.

Chemical Stability: Sodium silicate is chemically stable and resistant to many chemicals, which adds to its utility in various industrial processes.

Environmental Friendliness: In some applications, sodium silicate powder serves as an environmentally friendly alternative to other more harmful chemicals, particularly in detergent formulations where it acts as a builder without contributing to environmental pollution.

Water Solubility: Though available in powder form, sodium silicate dissolves easily in water, which facilitates its application in products that require mixing or dilution before use.

(whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8)

Specifications of whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8

Industrial quality sodium silicate, known as CAS 1344-09-8, is a vital product for concrete enhancing representatives. This product is a water glass remedy. It looks like a clear, thick fluid. The shade can be somewhat hazy. It is primarily a mix of sodium oxide and silicon dioxide. The proportion of SiO2 to Na2O is necessary. Usual proportions are around 2.0 to 3.3. This ratio affects its efficiency in concrete. The item has high pureness. It consists of really little iron and various other hefty steels. These impurities have to be low. High purity makes sure good reactivity. It likewise protects against undesirable impacts in concrete. The solution’s focus is another key point. It is typically marketed as a concentrated liquid. The concentration degree is generally in between 35% and 50%. This means it has a great deal of solids. Thickness is an essential requirements. The fluid is quite thick. Its viscosity adjustments with temperature level and concentration. Density is additionally gauged. The density commonly falls in between 1.3 and 1.6 g/cm TWO. The pH is extremely alkaline. It is generally over 11. This high alkalinity assists in concrete applications. It responds well with other products. Industrial quality sodium silicate functions well as a concrete additive. It helps make concrete stronger. It enhances the concrete’s durability. It additionally minimizes permeability. The item is secure under regular conditions. Maintain it kept appropriately. Store it in an awesome, completely dry place. Use sealed containers. Prevent straight sunshine. Usual product packaging consists of plastic drums or IBC lugs. Bulk vessel delivery is also feasible. It is extensively made use of in building tasks. Home builders utilize it for soil stablizing as well. It is a reliable material for improving concrete efficiency.

(whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8)

Applications of whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8

Industrial grade salt silicate, known as CAS 1344-09-8, is an essential material utilized to boost concrete. It acts as a concrete enhancing agent. People utilize it to make concrete surface areas harder and much more long lasting. It works by reacting with the lime currently existing in healed concrete. This response creates a new mineral compound. This new substance loads the tiny pores and invalidates within the concrete structure. Filling these pores makes the concrete much denser.

This densification procedure brings numerous essential benefits. Initially, it significantly increases the surface area solidity of the concrete slab. More challenging concrete withstands wear and abrasion far better. This is critical for commercial floors, storage facilities, and parking garages. These locations see rush hour and equipment. Second, salt silicate therapy significantly reduces concrete cleaning. Cleaning happens when weak surface particles break loose. The therapy binds these bits with each other securely. Third, it enhances the concrete’s resistance to water and chemicals. The denser framework stops liquids from soaking in conveniently.

Using sodium silicate remedy is fairly basic. Employees commonly spray or brush it onto clean, cured concrete surface areas. The concrete has to be porous adequate to absorb the liquid. The solution permeates numerous millimeters deep. It reacts chemically with the calcium hydroxide inside the concrete. This develops a hard, integrated surface layer. Several applications might be required for the very best results. Each coat needs time to react fully before adding the next.

This material is preferred for refurbishing old concrete floors. It renews worn surface areas without needing a complete replacement. It is a cost-effective means to expand concrete life. It is also considered eco-friendly. It utilizes water as the service provider and does not present hazardous unstable compounds. Contractors value its ability to enhance concrete from within. It provides long-term security against daily deterioration.

Company Introduction

Welcome to Iberocruceros, a leading supplier in the international market for high-quality potassium silicate, sodium silicate, and lithium silicate.

Our products are meticulously crafted to meet the diverse needs of various industries, including construction, agriculture, and manufacturing. With state-of-the-art production facilities and a commitment to excellence, we ensure superior product quality and customer satisfaction.

We pride ourselves on our innovative solutions, competitive pricing, and reliable delivery services. Partner with us for your silicate needs and experience the difference that expertise and dedication can make. Let’s build a sustainable future together.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8

What is sodium silicate concrete reinforcing agent?
This is a special liquid. It makes concrete harder. It makes concrete more waterproof. It uses industrial-grade sodium silicate. That’s CAS 1344-09-8. You mix it with water. Then you put it on existing concrete surfaces. It works deep inside the concrete.

Is it safe to use?
Yes, but you need care. Wear gloves and eye protection. Keep your skin covered. Keep it away from your eyes and skin. It can irritate. Use it where air moves well. Don’t breathe in the mist. Always check the Safety Data Sheet first.

How do I apply it?
Clean the concrete well. Remove dirt, oil, or loose bits. Mix the liquid agent with water. Follow the instructions for how much water. Usually, it’s one part agent to three or four parts water. Spray it or brush it on. Put on enough to make the surface wet. But don’t let puddles form. Let it dry. The concrete gets harder over the next few days.

Can I use it with other products?
Check first. It works with many plain concrete mixes. But test it if you use other sealers or coatings. Put the sodium silicate on first. Let it dry completely. Then test a small area with the other product. See if they work together. Some coatings might not stick well after.

How long does it last? How do I store it?
Stored right, it lasts about one year. Keep it in its original, sealed container. Keep it cool and dry. Don’t let it freeze. Don’t let it get too hot. Keep it away from strong acids. Strong acids can break it down.

How does it make concrete stronger?
The sodium silicate solution soaks into the concrete. It reacts with the lime inside. This reaction makes new crystals. These crystals are like tiny glue particles. They fill the small holes and pores. This makes the concrete denser. Denser concrete is harder. It resists water better. It also resists surface dusting and wear.

(whole industrial grade sodium silicate for concrete reinforcing agent cas 1344 09 8)