Overview of Potassium Silicate

Potassium silicate is an inorganic compound used across various industries for its excellent binding, corrosion resistance, and environmental compatibility properties. It is commonly found in agricultural, industrial, and construction applications as a stabilizer, binder, and protective coating.

Features of Potassium Silicate

Enhanced Corrosion Resistance: Provides superior protection against rust and corrosion.

Environmental Friendliness: Non-toxic and eco-friendly, suitable for sustainable applications.

Strong Adhesion: Excellent bonding capabilities, ideal for coatings and sealants.

Heat Resistance: Withstands high temperatures, making it perfect for refractory materials.

Versatility: Utilized in agriculture, construction, and industrial processes for its unique properties.

Specification of Lithium Metasilicate Lithium Silicate Concrete Densifier Liquid Powder Li2SiO3 CAS 10102-24-6

Lithium Metasilicate Concrete Densifier– Li Two SiO FOUR (CAS 10102-24-6)

Product Introduction

Lithium metasilicate (Li two SiO TWO) is a high-performance concrete densifier available in both fluid and powder forms. It responds with cost-free lime and calcium hydroxide in concrete to develop extra calcium silicate hydrate (C-S-H), the major binding substance that provides concrete its toughness. This response reduces surface porosity, enhances hardness, and improves total resilience.

Key Benefits

This densifier dramatically lowers cleaning and wear on concrete surface areas. It assists prevent moisture infiltration, which lowers the risk of breaking, spalling, and efflorescence. Unlike older sodium or potassium-based densifiers, lithium metasilicate does not leave behind residues that trigger unpleasant white deposits. It additionally dries faster and requires less applications, conserving time and labor expenses.

Technical Facts

– Chemical Call : Lithium metasilicate
– Molecular Formula : Li ₂ SiO TWO.
– CAS Number : 10102-24-6.
– Appearance : Clear liquid or white crystalline powder (relying on form).
– Solubility : Highly soluble in water.
– pH : Alkaline (commonly 10– 12 in remedy).

Application Standards

Relate to clean, audio concrete surface areas that are at the very least 28 days old. For liquid type, utilize a low-pressure sprayer, roller, or wipe. Permit the product to dwell for 20– 30 minutes, after that scrub gently and get rid of excess with a wet vacuum or squeegee. A 2nd coat might be applied if required. For powder form, dissolve in clean water per maker instructions before use. Constantly test on a little location initially to validate compatibility and preferred results.

Safety and security & Handling

Wear handwear covers, eye security, and appropriate garments throughout handling. Store in a cool, dry area away from acids and incompatible materials. Keep container firmly closed when not in use. Describe the Safety And Security Data Sheet (SDS) for full handling and disposal details.

Applications of Lithium Metasilicate Lithium Silicate Concrete Densifier Liquid Powder Li2SiO3 CAS 10102-24-6

Applications of Lithium Metasilicate Concrete Densifier

More Powerful, Denser Concrete Surfaces

Lithium metasilicate (Li ₂ SiO ₃), CAS 10102-24-6, is a crucial active ingredient in high-performance concrete densifiers. It can be found in both liquid and powder types. Professionals and builders use it to solidify and seal concrete floorings. The product reacts with cost-free lime and calcium hydroxide inside the concrete. This reaction creates additional calcium silicate hydrate (C-S-H). C-S-H fills little pores and spaces. Therefore, the surface becomes tougher and much less porous.

Reduces Cleaning and Wear

Untreated concrete usually creates dust. This dust originates from weak surface particles breaking out. Lithium metasilicate quits this by binding those fragments with each other. Floors treated with it stand up to everyday wear better. They also stand up well to foot web traffic, forklifts, and cleansing equipment. Maintenance costs go down because the surface area lasts longer.

Works Rapid and Leaves No Residue

Unlike older sodium or potassium-based densifiers, lithium metasilicate dries swiftly. It does not leave behind white deposit or efflorescence. That suggests no added cleaning or scrubbing after application. The finish stays tidy and clear. This makes it ideal for refined concrete tasks where appearance issues.

Ideal for Several Environments

You can use lithium metasilicate densifier in warehouses, garages, retailers, and plants. It additionally functions well on driveways, walkways, and cellar floorings. The therapy helps shield against oil stains, water damage, and chemical spills. Due to the fact that it penetrates deep right into the slab, the defense lasts for several years.

Easy to Use

Use the fluid variation with a low-pressure sprayer, roller, or wipe. The powder form mixes easily with water on site. Both types need only one coat for the most part. Allow it rest for a few hours, then rinse or rub as required. No unique devices or training are needed. Any person knowledgeable about basic flooring treatment can take care of the job.

Company Introduction

Welcome to Iberocruceros, a leading supplier in the international market for high-quality potassium silicate, sodium silicate, and lithium silicate.

Our products are meticulously crafted to meet the diverse needs of various industries, including construction, agriculture, and manufacturing. With state-of-the-art production facilities and a commitment to excellence, we ensure superior product quality and customer satisfaction.

We pride ourselves on our innovative solutions, competitive pricing, and reliable delivery services. Partner with us for your silicate needs and experience the difference that expertise and dedication can make. Let’s build a sustainable future together.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Lithium Metasilicate Lithium Silicate Concrete Densifier Liquid Powder Li2SiO3 CAS 10102-24-6

Frequently Asked Questions

What is lithium metasilicate concrete densifier?

Lithium metasilicate (Li₂SiO₃) is a chemical used to harden and seal concrete surfaces. It reacts with free lime in concrete to form a dense, dust-resistant layer. This product comes as a liquid or powder with CAS number 10102-24-6.

How does it work on concrete?

When applied, lithium metasilicate enters the concrete pores. It combines with calcium hydroxide inside the slab. This reaction creates additional calcium silicate hydrate (C-S-H), which fills gaps and strengthens the surface. The result is a harder, smoother, and more durable floor.

Why choose lithium over sodium or potassium densifiers?

Lithium-based products do not leave behind white residue (efflorescence). They penetrate deeper and react faster. They also cause less surface buildup, so polishing is easier. Lithium densifiers work well on new and old concrete without long waiting times.

Can I use it on any concrete surface?

Yes, it works on most interior and exterior concrete floors. It suits garages, warehouses, showrooms, and driveways. Make sure the surface is clean and free of sealers, oil, or coatings before application. Proper preparation ensures full penetration and best results.

How do I apply lithium metasilicate densifier?

First, clean the concrete thoroughly. Apply the liquid evenly using a sprayer, roller, or mop. Let it sit for 20–60 minutes. Keep the surface wet during this time. Then scrub lightly and remove excess liquid with a wet vacuum or squeegee. Allow it to dry fully before polishing or sealing. For powder form, mix with water as directed before use. Always follow safety instructions on the label.